References

[1] M. Kaneko and K. Tanie, �Contact point detection for grasping an unknown object using self-posture changeability,� IEEE Transactions on Robotics and Automation, vol. 10, no. 3, pp. 355�366, June 1994.

[2] G. A. Bekey, et al. �Knowledge-based control of grasping in robot hands using heuristics from human motor skills,� IEEE Transactions on Robotics and Automation, vol. 9, no. 6, pp. 709�722, December 1993.

[3] S. A. Stansfield, �Robotic grasping of unknown objects: a knowledge-based approach,� Int. J. of Robotics Research, vol. 10, no. 4, pp. 314�326, August 1991.

[4] A. S. Rao and K. Y. Goldberg, �Friction and part curvature in parallel-jaw grasping,� J. of Robotic Systems, vol. 12, no. 6, pp. 365�381, June 1995.

[5] A. Blake and M. Taylor. �Planning planar grasps of smooth contours,� Proc. of the IEEE Int. Conf. on Robotics and Automation, pp. 834�838, 1991.

[6] I. Chen and J. W. Burdick. �Finding antipodal point grasps on irregularly shaped objects,� IEEE Trans. on Robotics and Automation, vol. 9, no. 6, pp. 507-512, August 1993.

[7] J. Ponce, D. Stam and B. Faverjon. �On computing two-finger force-closure grasps of curved 2D objects,� Int. J. of Robotics Research, vol. 12, no. 3, pp. 263�273, June 1993.

[8] J. L. Jones and T. Lozano-Perez. �Planning two-fingered grasps for pick-and-place operations on polyhedra,� Proc. of the IEEE Int. Conf. on Rob. and Auto, pp. 355�366, 1990.

[9] K. Y. Goldberg. �Orienting polygonal parts without sensors,� Algorithmica, vol. 10, pp. 201�225, 1993.

[10] R. D. Quinn et al. �Design of an Agile Manufacturing Workcell for Light Mechanical Applications,� Proc. of the IEEE Int. Conf. on Rob. and Auto., pp. 858�863, 1996.

[11] R. D. Quinn et al. �An Agile Manufacturing Workcell Design,� IIE Transactions on Design and Manufacturing, Special Issue on Agile Manufacturing, in press.

[12] F. L. Merat et al. �Advances in Agile Manufacturing,� Proc. of the 1997 IEEE Int. Conf. on Robotics and Automation, in press

[13] A. S. Wallack and J. F. Canny. �Planning for Modular and Hybrid Fixtures,� Proc. of the IEEE Int. Conf. on Robotics and Automation, pp. 520�527, 1994.

[14] R. F. Brost and K. Goldberg. �A complete algorithm for synthesizing modular fixtures for polygonal parts,� Proc. of the IEEE Int. Conf. on Rob. and Auto., pp. 535�542, 1994.

[15] J. F. Canny and K. Goldberg. �A RISC approach to sensing and manipulation,� J. of Rob. Systems, pp. 351-363, 1995.

[16] H. Asada and A. B. By. 1985. �Kinematic analysis of workpart fixturing for flexible assembly with automatically reconfigurable fixtures. IEEE J. of Robotics and Automation, vol. RA-1, no. 2, pp. 86�94.

[17] J. D. Cawley, et al. �Al203 ceramics made by CAM-LEM (computer-aided manufacturing of laminated engineering materials) technology.� Solid Freeform Fabrication Sym-posium Proceedings, pp. 9�16, Austin, TX, August 1995.

[18] B. B. Mathewson, W. S. Newman, A. H. Heuer and J. D. Cawley. �Automated fabrication of ceramic components from tape-cast ceramic.� Solid Freeform Fabrication Symposium Proceedings, pp. 253�260, Austin, TX, August 1995.

[19] W. S. Newman, Y. Zheng and C. C. Fong. �Trajectory generation from CAD models for computer-aided manufacturing of laminated engineering materials.� 26th Int. Symposium on Industrial Robots, Singapore, October 1995.

[20] J. C. Trinkle. �A quantitative test for form closure grasps.� IEEE Int. Conf. on Intelligent Robots and Systems, pp. 1245�1251, July 1992.

[21] F. Reuleaux. The Kinematics of Machinery. New York: Macmillan, 1876; reprint, New York: Dover, 1963.

[22] J. K. Salisbury, �Kinematic and force analysis of articulated hands,� PhD dissertation, Department of Mechanical Eng., Stanford Univ., Stanford, CA, Rep. STAN-CS-82-921, July 1982.

[23] R. C. Brost and R. R. Peters, �Automatic design of 3-D fixtures and assembly pallets,� Proc. of the IEEE Int. Conf. on Robotics and Automation, pp. 495�502, 1996.

[24] R. C. Brost, �Dynamic planning of planar manipulation tasks,� Proc. of the IEEE Int. Conf. on Robotics and Automation, pp. 2247�2254, 1992.

[25] S. Akella and M. T. Mason, �Posing polygonal objects in the plane by pushing,� Proc. of the IEEE Int. Conf. on Robotics and Automation, pp. 2255�2262, 1992.

[26] M. T. Mason, �Mechanics and planning of manipulator pushing operations,� Int. J. of Robotics Research, vol. 5, no. 3, pp. 53�71, Fall 1986.

Previous